Pono Revival Ultra-Purifying Shower Filter


When we drink contaminated tap water, the toxins are partially filtered out by our liver, kidneys, and digestive system. Steam from a hot shower though contains 80x the levels of chemicals that when inhaled, enters directly into the bloodstream. Chlorine and most other contaminants vaporize faster and at a lower temperature than water, so harmful exposure is inevitable when taking a shower.

“A long, hot shower can be dangerous. The toxic chemicals are inhaled in high concentrations.” – Dr. John Andelman, PhD., Bottom Line; 8/87

Unlike other dechlorinating shower filters, Pono Revival Ultra-Purifying Shower Filter is specifically engineered for efficiency and performance. Tap water is passed through several contaminant removal media to effectively remove those contaminants that are harmful when vaporized. Certified grade alkaline minerals that are filled with negative ions and far-infrared radiation will create a healthful atmosphere leaving you rejuvenated with smoother skin and silky soft hair. Enjoy a revitalizing spa-like experience every time you shower.

The Pono Revival Ultra Purifying Shower Filter is formulated to effectively remove:

300+ Other contaminants
Heavy metals such as lead, mercury, nickel, chromium, and other dissolved metals
Controls scale, bacteria, and algae



Designed and manufactured in California, USA, the multi-functional Pono Revival Ultra-Purifying Shower Filter is formulated to effectively remove chlorine, chloramine, fluoride, heavy metals such as lead, mercury, nickel, chromium, other dissolved metals, and 300+ other contaminants while controlling scale, bacteria, and algae.

Far-infrared negative ions and tourmaline balls act as “mineral stones” or “bioactive stones” that work together to reduce the hardness of the water, while its negative ions are linked to improvements in health and wellbeing. The nano Alumina portion will remove the fluoride found in the water. The activated carbon removes chloramine in the water, which other shower filters cannot remove. The copper/zinc redox (KDF) portion removes chlorine and heavy metals. Lastly, tourmaline crystals will nourish and energize the water bringing it back to life.

Our shower filters are made to last, so you don’t have to worry about changing our shower filter cartridge for 2 years.

Easy Step by Step Installation Process

STEP 1. Remove your existing showerhead from the shower pipe. This should just unscrew. It may be a little tight due to age. You may use an adjustable wrench to unthread the top half of the showerhead from the shower arm pipe.
STEP 2. Wrap the enclosed Teflon tape tightly around the exposed pipe; this helps to seal the connection between the new shower filter and the pipe (to prevent water leaking).
STEP 3. Remove your new shower filter from the box, and unscrew the white cap from the clear housing.
STEP 4. Attach the new filter white filter cup to the shower pipe by screwing it around until it is tight and sitting upright as shown in the picture.

Pono-Revival-Shower-Filter-Installation 1

Pono-Revival-Shower-Filter-Installation 2

STEP 5. Hold shower filter cartridge and clear housing to shower arm, carefully aligning the threads, and twist in a clockwise direction until hand tight. Pay close attention to thread alignment during this step. Cross threading the shower filter to the shower arm may damage the unit. The inside cartridge should be oriented with KDF media (gold powder media) upright.

Pono-Revival-Shower-Filter-Installation 3

Pono-Revival-Shower-Filter-Installation 4

STEP 6. Reinstall existing/new shower head to the output side of the shower filter with handheld shower fixtures; it is recommended to install the bracket/diverter assembly directly to the front of the shower filter as well. Hand tighten the showerhead to the shower filter using a clockwise twisting motion until firmly attached.

Note: Be sure to double-check the condition and placement of the gasket that is included with your shower head. Worn or torn showerhead gaskets may cause leaking and reduced overall water pressure and performance.

Pressurize Your New Shower Filter

Turn on the water and let run for 1-2 minutes to fully pressurize the inside cartridge and filter housing. Check for leaks at the shower arm, cartridge attachment point, and shower head attachment point. If leaks are found, turn off the water and re-tighten problem areas. Hand tools may be used only at the showerhead connection point. No more than an additional 1/2 turn with any hand tool is recommended.

Congratulations! Your brand new shower filter may be used and enjoyed immediately.

Pono-Revival-Shower-Filter-Installation 5

Pono-Revival-Shower-Filter-Installation 6